Lot Acceptance Testing (LAT)

Advantages

Lot Acceptance Testing provides screening and qualification tests to enable the use of Exxelia Ohmcraft’s standard parts in flight applications (Aerospace/Space). Exxelia Ohmcraft can screen and qualify its resistor products to MIL-PRF-55342, MIL-PRF-49462, NASA EEE-INST-002 (Level 1 or Level 2) or a custom test plan. LAT Testing includes but is not limited to:

  • Thermal Shock
  • Power Conditioning
  • High Temperature Exposure
  • Solderability
  • TCR
  • Load Life
  • Short Term Overload
  • Terminal Strength
  • Resistance to Solvents
Value R R Ω Resistance Value in kΩs, MΩs, GΩs, or TΩs
Tolerance ± X% at V Resistance Tolerance measured at specified voltage
TCR < [Ordering Coder TCR] ppm/ºC (Hot to TmaxºC, Cold to TminºC)
< 2*[Ordering Coder TCR] ppm/ºC (Hot to 125ºC, Cold to -55ºC)
TCR referenced to 25ºC
Working Voltage V Voltage across the resistor during application operation
Max Voltage Rating V Maximum Voltage based on resistance value or case rating
Max Power Rating W Maximum Wattage based on resistance value or case rating

Pre-Cap Visual Inspection

Prior to Conformance Test 13 pcs

Conformance Test – 100% Screening

Visual Inspection

  • Magnification: 30x to 60x
100%
Mechanical Inspection 3 pcs. (minimum)
DC Resistance

  • Per MIL-STD-202, Method 303
  • Measured at specified test voltage for resistance tolerance
100%
Thermal Shock

  • Per-MIL-STD-202. Method 107, Test Condition B (modified)
  • 5 cycles (MIL-PRF-55342), 10 cycles ( NASA level 2) or 25 cycles (NASA level 1)
  • Min. temp -55ºC, Max temp 125ºC
100%
High Temperature Exposure (SMT)

  • 100 hours at 125ºC
100%
Power Conditioning (Leaded)

  • 100 hours at Working Voltage at 25ºC
100%
Final DC Resistance

  • Per MIL-STD-202, Method 303
  • Measured at specified test voltage for resistance tolerance
100%

Conformance PDA: 5% (NASA Level 1 or MIL-PRF-55342), 10% (MIL-PRF-49462) or 15% (NASA Level 2)

Group

NASA Sample Size (Level 1 / Level 2)

Group 1

  • Conformance Testing: Basic Screening
100%
Group 2

  • Solderability
    • MIL-STD-202, Method 208
  • Resistance to Solvents (Leaded)
    • MIL-STD-202, Method 215
3 pcs / 3 pcs
Group 3

  • Temperature Coefficient (TCR)
    • Per MIL-STD-202, Method 304
    • Reference Temperature: 25ºC
  • Low Temperature Storage
    • -65ºC no load dwell for 24±4 hours
    • +25ºC ambient no load dwell for 2-8 hours
  • Low Temperature Operation
    • -65ºC no load dwell for 1 hour
    • Working Voltage for 54 minutes
    • +25ºC no load dwell for 24±4 hours
  • Short Time Overload
    • 2X Working Voltage for 5 seconds
10 pcs / 6 pcs
Group 4

  • Resistance to soldering heat
    • MIL-STD-202, Method 210, Test Condition B (modified)
    • 260ºC for 20 seconds
  • Terminal Strength (Leaded)
  • MIL-STD-202, Method 211 Test Condition C
  • 16 ounces ± 1 ounce for 10 seconds
9 pcs / 6 pcs
Group 5

  • Shock (Leaded)
    • MIL-STD-202, Method 213B, Test Condition I
  • Vibration (Leaded)
    • Per MIL-STD-202, Method 204, Test Condition D
9 pcs / 6 pcs
Group 6

  • Load Life
    • Per MIL-STD-202, Method 108
    • Working Voltage for 1000 or 2000 hours at 25ºC
12 pcs / 9 pcs
Group 7

  • Resistance to Bonding Exposure (SMT)
    • Solder mounted to a ceramic test plate
    • 4-12 hours stabilization at 25ºC
10 pcs / 5 pcs
Group 8

  • No Applicable Tests
Group 9

  • High Temperature Exposure
    • 125ºC for 100 hours
5 pcs

Custom Configurations Available Upon Request

Please consult with our knowledgeable sales staff for help specifying custom parts to meet your needs.

New Project Inquiries

Name(Required)
This field is for validation purposes and should be left unchanged.